Kana Designed, Supplied & commissioned 3 nos. Local Starter Panels for 55KW submersible pumps, and one Process Control Panel with Programmable Logic Controllers & Telemetry Controls for Remote Operation & Control of 3 pump sites from reservoir control center.

Kana Designed, Supplied, Installed & Commissioned Telemetry & SCADA system at Odor Control Facility at Dhaiya Area & Replaced existing Control room SCADA & Telemetry Communication front end Equipment at Ardiya Control Center & Installed additional radios at remote sites for retransmission of signals to Dhaiya Control room.

Kana Designed, Supplied, Installed & Commissioned the first radio telemetry control SCADA proto type project of KOC, with 25 well sites being monitored in GC-4 Control room via Radio Telemetry using KOC trunking system. It was the first project to implement the HART protocol over the radio communication. The project involved the SCADA to be further interfaced to existing DCS and HART protocol commands to be initiated through DCS.

Ministry of Public Works - Kuwait

Kana Designed, Supplied & Installed Process control panels to interface Remote terminal units, with Pump Switchgear at 9 pumping stations, and commissioned the complete SCADA telemetry system for Supervisory Control & Monitoring of Effluent utilization and satellite irrigation network for VIP rout with 22 Field Control units (FCU), communicating to the Central via conventional radio network.

Ministry of Public Works - Kuwait

Kana Designed, Supplied, Installed & Commissioned 13 No RTUs along with SCADA Central at DMC to Monitor & Control the Intermediate Pumping Stations and Irrigation Farms.

Kana Designed, Supplied, Installed & Commissioned Supervisory Control & Data Acquisition System (SCADA) for Monitoring & Control of Deep & Shallow Water Well Pump houses and the Tanks & Pumps at Abdulliah Water Center (AWC).

Ministry of n Public Works - Kuwait

Kana Upgraded the SCADA Software at Ardiya, Installed Additional Front End to retransmit the Data to 3 Remote Control Centers.

Kana Designed, Supplied, Installed & Commissioned 40 Nos. Remote Terminal Units to monitor & Control Substations using a Supervisory Control & Data Acquisition System (SCADA) located at Power House in the Naval Base. Hybrid communication utilizing Fiber optic Medium for data transfer to & from Substations within the Naval Base and Radio communication medium for data transfer to & from Remote Substations out side Naval Base.

Ministry of Public Works - Kuwait

Kana Designed, Supplied, Installed & Commissioned New Telemetry SCADA System for Monitoring, Operation parameters of 24 Remote Secondary Pumping & Lifting Stations and Upgraded the 16 existing Remote Secondary Pumping & Lifting Stations and incorporated them in New Telemetry SCADA System at Ardiya Central Control Room for Lifting Stations and retransmission of signals through Internet using WebVue Server Software.

Kana is to Design, Supply, Install & Integrate & Commission Instrumentation, SCADA Telemetry system & Electrical works including Remote Terminal Units, MCC’s with VFD controls for 10 pumping stations and 40 Nos. Field Control Units for Irrigation Network into the existing SCADA Telemetry System.

Kana Designed, Supplied & Commissioned SCADA System for Monitoring & Control of redundant PLC based Burner Management & Control System for Heaters at ASAB Plant of GASCO Abu Dhabi.

Kuwait National Petroleum Company - Kuwait

Kana Designed, Supplied & Commissioned /Reinstated Hot standby PLC based Telemetry Control System for Remote Operation & Control of Fuel Oil Transfer Pumps from Product Loading Control Room (PLCR) and Washeries Control Room (WCR) at Mina Al Ahmadi Refinery, utilizing the existing network and integrated it to Foxboro DCS.

Ministry of Information - Kuwait

Kana Designed, Supplied, Installed & Commissioned PLC based SCADA System for Load Management & Operation & Controls of 2 nos. 1MW Diesel Generators & their associated loads, for Emergency Power of MAGWA TV Transmission Station.

Ministry of Information - Kuwait

Kana Designed, Supplied, Installed & Commissioned PLC based SCADA System for Load & Building Management, and Operation & Controls of 2 nos. 4.5MW Diesel Generators & 23 nos. 11KV Loads, for Emergency Power of Kabad Radio Broadcasting Station

Municipality of Al-Ain - U.A.E

Kana Designed, Developed & Commissioned, Control Logic, Software & Graphics for the Monitoring & Control of 5 Remote Fountains from a Centralized Control Center in Al-Ain - U.A.E.

Ministry of Electricity & Water - Oman

Kana Designed, Developed & Commissioned, Control Logic, Software & communication for the Operation, Monitoring & Control of 5 Remote Water Well Sites from Central Reservoir Control Center at SADAH in OMAN.

Joint Operations (KOC & Saudi Arabian Texaco)

Kana Designed, Developed Supplied, Installed & Commissioned, Yokogawa DCS System based Controls for the Auto Ignition and Controls of 9 Heaters at MGC Wafra with Burners & all Field Instrumentation being used on Foundation Fieldbus Protocol.

UGCC/ Ministry of Public Works

Kana is Subcontracted by the Main Contractor M/s UGCC for Design, Development, Supply, Installation & Commissioning of complete Instrumentation, PLC based Control Systems and SCADA for Monitoring & Operation of New Mishref Pumping Station

KBR / Southern Oil Company - Iraq

Kana Designed, Engineered, Supplied, & Commissioned, MODICON PLC based Controls for the 4nos. Cluster Pumping Station for Water Injection complete with SCADA System for each pumping station.

KBR / Southern Oil Company - Iraq

Kana Designed, Engineered, Supplied, & Commissioned, PLC based Controls for the 4nos. Cluster Pumping Station & One Booster Station for Water Injection Plant in North & South Rumaiyla - Iraq, complete with SCADA System for each pumping station.

Kuwait Insulating Materials Manufacturing Co. – Kuwait

Kana Engineered, Supplied, Installed & Commissioned, Distributed Control System for Kuwait Insulating Materials Manufacturing Company, Shuaiba Plant Hot end Process. The project involves complete Automation and Electrical Control Equipment for various stages of the plant and the Central Control Room.